SR-L-01

€576.00
Material:
Powder Coating Black
MaterialMaterial
1

Product image
Product image
Product image
Product Details

Pendant, Floor Lamp or Sculpture? The SR-L-01 has the power to immediately transform any space with its simplicity and elegance. SR-L-01 comes in brushed brass, brushed stainless steel, powder coating black or powder coating white.

Powder-coated white version, made to order. 

 

The SR-L-01 comes with a power plug and a switch (in white). To use this light as a pendant light please speak to your electrician, they can assist you in fitting and installing the light.

H: 1425 mm, Pipe Diameter: 30 mm
Cord Length: 2,5 m
Weight: 1.8 kg

LIFE HOURS: approx. 50.000 h
CERTIFICATION: CE (230V)
ILLUMINATION: LED
WATTAGE: approx. 14 Watt
COLOR TEMPERATURE: approx. 3.000 K
CORD: Textile Covered white, 2,5 m
LM/W: approx. 98
MATERIALS: Brushed Brass, Brushed Stainless Steel, Powder Coated Black, Powder Coated White, Polycarbonate (Tube)

Market Compliance: Europe
CE (230V)
POWDER COATING
If possible, the surface should only be cleaned with pure water (maximum 25 °C). Use a clean and soft cloth for daily cleaning. Use a soft damp cloth to remove stains. Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia. Use only soft cloth for wiping and polishing, never use sponges or metal scrubs. Avoid rubbing hard on the surface. Dont use sharp objects, steam blasting equipment, the surface temperature during cleaning must not exceed 25 °C.

BRUSHED BRASS
Wear soft gloves during assembly. Daily cleaning can be done by wiping with a clean dry cloth. Should the surface need more attention, this can be cleaned with water and a mild detergent or soap applied with a damp cloth. Wipe afterwards with a clean dry cloth. Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia. Use only soft cloth for wiping and polishing, never use sponges or metal scrubs. always wipe in the direction of the structure. Contact with acid or caustic liquids of any kind as well as hand perspiration must be avoided at all costs.

BRUSHED STAINLESS STEEL
Daily cleaning can be done by wiping with a clean dry cloth. Should the surface need more attention, this can be cleaned with water and a mild detergent or soap applied with a damp cloth. Wipe afterwards with a clean dry cloth. Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia. Use only soft cloth for wiping and polishing, never use sponges or metal scrubs. always wipe in the direction of the structure.

POLYCARBONATE
Contact with hard objects must be avoided at all costs. For daily cleaning it is recommended to use a soft cloth wrung in lukewarm water. For more severe cleaning a mild detergent can be used. Always dry immediately after. Please do not use: microfibre cloths, scouring agents, harsh cleaning agents, scouring cloths, brushes, abrasive pads or cloths. Solvents and chemicals such as acetone, benzene or carbon tetrachloride, paint thinner or alcohol compounds with more than 5% alcohol can attack the surface and make it cloudy.

DISCLAIMER
The information included in these materials is a guidance on the proper care and maintenance of our products, but this guidance cannot be considered a guarantee of specific results. We are not liable for any damage resulting from care and maintenance activities. Information from suppliers of chemicals and cleaning solvents, including but not limited to label instructions, should always be
followed.